Relay module; Nominal input voltage: 115 VAC; 2 changeover contacts; Limiting continuous current: 8 A; with gold contacts; Red status indicator; Module width: 15 mm; 2,50 mm²; gray
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | Relay and Optocoupler Modules |
| Lifecycle | active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
Shipping & availability
When can 788-615 be shipped?
788-615 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up 788-615 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for 788-615 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for 788-615, subject to availability and destination.
Relay module; Nominal input voltage: 115 VAC; 2 changeover contacts; Limiting continuous current: 8 A; with gold contacts; Red status indicator; Module width: 15 mm; 2,50 mm²; gray 788-615
Specifications
Notes
| Safety Information | A separator plate (e.g., 209-191) must be used for voltages exceeding 250 V between adjacent relay modules and to comply with reinforced insulation requirements. |
| Note | Reinforced insulation between coil and contacts, To prevent damaging the gold layer, 30 VDC switching voltages and 50 mA currents must not be exceeded. Higher switching power eventually evaporates the gold layer. The resulting deposits in the housing may reduce service life., To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit. |
Technical data - Control circuit
| Nominal input voltage U<sub>N</sub> | 115 VAC |
| Input voltage range | ±10 % |
| Nominal input current at U<sub>N</sub> | 9 mA |
Technical data - Load circuit
| Number of changeover/switchover contacts | 2 |
| Contact material (relay) | AgNi + Au |
| Limiting continuous current | 8 A |
| Switching Voltage, Max. | 250 VAC |
| Switching power (resistive) max. | AC 2000 VA; DC (see load limit curve) |
| Switching capacity | AC-15: 3 A / 250 VAC; DC-13: 2 A / 24 VDC |
| Recommended minimum load | 5 V / 2 mA / 50 mW |
| Pull-in time (typ.) | 7 ms |
| Drop-out time (typ.) | 3 ms |
| Bounce time (typ.) | 6 ms |
| Electrical life (NO; resistive load; 23 °C) | 100 x 10³ switching operations |
| Mechanical life | 30 x 10⁶ switching operations |
| Switching frequency with/without load (max.) | 10 min-1 / 1200 min-1 |
Technical data - Signaling
| Status indicator | Red LED |
Safety and protection
| Rated voltage | 250 V |
| Rated impulse withstand voltage | 4 kV |
| Pollution degree | 3 |
| Dielectric strength (control/load circuit) (AC, 1 min) | 5 kVrms |
| Dielectric strength (open contact) (AC, 1 min) | 1 kVrms |
| Dielectric strength (load/load circuit) (AC, 1 min) | 2.5 kVrms |
| Safety Information | A separator plate (e.g., 209-191) must be used for voltages exceeding 250 V between adjacent relay modules and to comply with reinforced insulation requirements. |
| Protection type | IP20 |
Connection data
| Connection technology | Push-in CAGE CLAMP® |
| Solid conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
| Fine-stranded conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
| Strip length | 9 … 10 mm / 0.35 … 0.39 inches |
Physical data
| Width | 15 mm / 0.591 inches |
| Height | 86 mm / 3.386 inches |
| Depth from upper-edge of DIN-rail | 54 mm / 2.126 inches |
Mechanical data
| Mounting type | DIN-35 rail |
Material data
| Note (material data) | Information on material specifications can be found here |
| Color | gray |
| Fire load | 0.642 MJ |
| Weight | 47.7 g |
Environmental requirements
| Ambient temperature (operation at U<sub>N</sub>) | -40 … +70 °C |
| Ambient temperature UL (operation at U<sub>N</sub>) | -40 … +50 °C |
| Ambient temperature (storage) | -40 … +70 °C |
| Processing temperature | -25 … +50 °C |
| Temperature range of connection cable | ≥ (Tambient + 20 K) |
Standards and specifications
| Standards/specifications | EN 61010-2-201, EN 61810-1, EN 61373, UL 508, DNV |
Basic relay
| WAGO Basic Relay | 788-177 |
Commercial data
| Product Group | 6 (INTERFACE ELECTRONIC) |
| PU (SPU) | 20 (1) pcs |
| Packaging type | box |
| Country of origin | DE |
| GTIN | 4045454389536 |
| Customs tariff number | 85364900990 |
Product Classification
| UNSPSC | 39122334 |
| eCl@ss 10.0 | 27-37-16-01 |
| eCl@ss 9.0 | 27-37-16-01 |
| ETIM 9.0 | EC001437 |
| ETIM 10.0 | EC001437 |
| ECCN | NO US CLASSIFICATION |
Environmental Product Compliance
| CAS-No. | 7439-92-1, 79-94-7 |
| REACH Candidate List Substance | 2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol, Lead |
| RoHS Compliance Status | Compliant,With Exemption |
| RoHS Exemption | 7(a) |
| SCIP notification number (Austria) | 3b71dadb-db7c-43c7-8ff5-9bb4a839b6e7 |
| SCIP notification number (Belgium) | 00723b1f-97a7-499f-aebb-a0610cfb5a46 |
| SCIP notification number (Bulgaria) | a9e3ceba-2e45-4520-bd12-42870e946e1c |
| SCIP notification number (Czech Republic) | 01075b53-3be2-4516-bb01-054bb09b7094 |
| SCIP notification number (Denmark) | 8c697204-760e-4ee4-89ac-8459f71b73e5 |
| SCIP notification number (Finland) | 55ad6a97-41d2-4175-ae76-a9912120e99f |
| SCIP notification number (France) | 3c51cbe7-7be7-4dd9-a13c-4c1399d90a06 |
| SCIP notification number (Germany) | f3c82aa7-56c9-4ebc-aa46-822db35a3132 |
| SCIP notification number (Hungary) | 5a1eca45-2ae9-4943-897f-343bc744071b |
| SCIP notification number (Italy) | 636f2775-183d-4a93-a45d-47c49e3f4d03 |
| SCIP notification number (Netherlands) | 88f9a7b3-a0fc-45da-b033-d19a4452b3b6 |
| SCIP notification number (Poland) | 53ea8859-f043-4832-9106-a44fa8688ba2 |
| SCIP notification number (Romania) | 35f2bf5c-0dc3-4474-8eef-8461a7a371b7 |
| SCIP notification number (Sweden) | cd6ebd2c-a107-4cfa-8344-4fce913f3bbf |








